Results 1 to 2 of 2

Thread: Chassis for the Silverfox A Class

  1. #1
    Senior Member Glenderg's Avatar
    Join Date
    Apr 2012
    Location
    North Inner City, Dublin
    Posts
    3,118
    I've emptied the stock box, and taken as many orthographic, or as close as, photos to help. Most are Lima pancake jobs, so I'm not sure what the current Hornby innards are of these. You'll have to google/debate the pro's and con's of each, but most are cut n shuts - never an ideal solution. *When I say "perfect alignment" it does not mean so. The bogies on the A-Class are trimount, and no RTR manufacturer allows for the offset arrangement of the central axel. The central one is shanked to one side.

    Attachment 16248

    Deltic chassis as used under the Sulzer - almost right, needs a cosmetic sideframe, and hornby version wouldn't pull hot snot - see Kirley's trials with it on his WB.

    Attachment 16249

    Yank thing - SD9? - Easy to cut and shut, no weight, will need cosmetic sideframes, perfect alignment.

    Attachment 16250

    Class 50 Hoover - cut and shut job, needs cosmetic sideframes, perfect alignment. Pulling power questionable.

    Attachment 16251

    Class 47 - same as above Class 50

    Attachment 16252

    Class 31 - Bogie is far too big - sorry Des On the positive, the sideframes are good if you wish to go slightly oversized.

    Attachment 16253

    Attachment 16254

    Altas RSD4/5 Chassis - very slightly underscale, but front to back axles are correct, trimount bogie present, no cutting required. Central tank is die cast metal, so unsure how one would deal with it. Warbonnet tells me it's relatively easy to DCC these elderly, but powerful chassis'. I hope that does something to inform this debate. Richie.
    Attached Images Attached Images        
    Last edited by BosKonay; 10-12-2014 at 03:02 PM.

  2. #2
    Senior Member Horsetan's Avatar
    Join Date
    Sep 2012
    Location
    My heart and soul is in County Clare, but my body is elsewhere :-(
    Posts
    870
    What is the measurement of the asymmetrical bogie wheelbase in millimetres? I still have a number of US diesels to sell, and - who knows - one might just be suitable for ye....
    "F*** your Honda Civic, I've a horse outside"

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Welcome to Irish Railway Modeller. The home of Railway Modelling and collecting in Ireland. We are a friendly, open community where you will find lots of support, advice and encouragement, as well as inspiration! Join us today!
Join us