Jump to content

controller

Members
 View Profile  See their activity

  • Posts

    127

  • Joined

  • Last visited

 Content Type 

Everything posted by controller

  1. controller
    Garfield, DJ, Si2020, Thank you all very much for all your help. Loco 018 is out of the works, and back in service where she belongs. All functions up and running. Thanks again. Controller.
  2. controller
    Hi Simon, I haven't tried those functions yet, I didn't know they went up that far. Shows you how much I know about decoders. Have to go and do some work now, but I will give them functions a try in the evening. I will give the lads in IRM a shout about that decoder function list. Thanks for all your help. Controller. Thank you DJ, Your a gentleman. Controller
  3. controller
    Hi, Thanks Simon, that helps a great deal. I saw a list of all the functions for this decoder on the forum some time back, I should have printed it off . The problem remains about the lights, headlight, cab, engine room, none of them are working. Hope you can tell me what I am doing wrong. Once Again Thanks, Controller.
  4. controller
    Hi Garfield, I tried a different decoder (one from my MM 201) in 018. The same problems occurred. No F4 5 6 or 7 . The headlight came on with F8, but in the wrong direction. No cab or engine room lights. I don't know if the problem is with the loco or the decoder. Thanks, Controller.
  5. controller
    Hi Garfield, I will give that a try, and get back to you. Thank You, Controller.
  6. controller
    Hi, I finally got a chance to put a EMD Sound Decoder (from IRM) in to my A class loco 018 (superb loco). F1,F2,and F3 work fine. F4,F5, F6 ,F7 and F13 are a no show. All the rest work fine. I am using a Gaugemaster Prodigy Advance controller. Someone tell me what I am doing wrong, please. Thanks, Controller.
  7. controller
    Spot on, took 134 out of the box and compared it to the other two, much brighter. Controller.
  8. controller
    Thanks for your replies. I have locos 125,131 and 134. Maybe the lights were meant to be like that, best left alone. Controller.
  9. controller
    Hi, I am running the loco on DCC. I am afraid now that if I increase power to the bulb, I might blow it. It is a very small LED. Controller.
  10. controller
    Hi, Is there a way to increase the brightness of the headlight on the MM121 loco?. At the moment it is very dull. Thanks, Controller.
  11. controller
    Murphaph, Sorry about the confusion. I read the instructions again, that came with the van.(The PCB contains an eight-pin DCC decoder socket). When I bought the van from Marks, he told me they didn't have the right decoder, the only one he had was a wired one, and the wires would be seen hanging down in the compartment. That made me think that there was such a decoder without wires. Back to the drawing board. Thanks, Controller.
  12. controller
    Murphaph, I had a look at the decoder you suggested. I has everything I require, except that one is wired . The one I need is a eight pin direct connection. There is not much room in the van, and the wires would show. I will ask the lads in IRM if they have any, or maybe they can tell me where I can get the right one. Thanks, Controller.
  13. controller
    Murphaph, your a gentleman, thank you. Controller.
  14. controller
    Thanks NIR, Again, good advice. I would have come to grief before I even started. Can the proper decoders be purchased online, EBay perhaps?. I could take a look, if I knew which one to buy. Better safe than sorry. Controller.
  15. controller
    Thanks Murphaph, It's always good to seek advice from the experts. I don't want to blow all the lights before I get a chance to enjoy them. Maybe IRM might have some, or know where to get them. Thanks Again, Controller.
  16. controller
    Thanks NIR, I don't have anything like that at the moment. I was just trying to avoid online, postal charges, Brexit etc. Marks Models were sold out when I bought the plough van and ballast wagons just after Christmas. I have one or two old decoders that may have light functions, but they are wired. Thanks, Controller.
  17. controller
    Where can I buy a decoder for the IRM plough van?. Thanks, Controller.
  18. controller
    Thanks Wrenneire, Had a look at that, now to find a chip. Controller
  19. controller
    Can someone please tell me which decoder fits the IRM ballast plough van. I have removed the top part of the van without wrecking anything, but now I need help with where do I place the new decoder. Also where can I buy these decoders. Thanks, Controller
  20. controller
    Thanks BosKonay, The minute I asked this question, I remembered that most of the money I have is in the form of vouchers for Marks Models. So for 325 euro (including vouchers) I will get six wagons and two plough vans. I will be happy enough with that for now. Thanks again Controller.
  21. controller
    Hi. I have been looking at the IRM bundle pack nine wagons plus two plough vans for 375euro. Can someone tell me if these are authentic looking wagons and vans. They are from the era 1977-1987. I am planning to buy some plough vans and wagons. Is this bundle a good deal?. Thanks Controller.
  22. controller
    Thanks Lads, I think I will, as you advise, run the locos a lot more. If I got to the stage where I want to adjust CV5 or CV6 how do I find the speed settings in CV5 or 6?. I will only do this as a last resort. I am a little bit more confident in changing CVs after all your help. Controller
  23. controller
    Hi Irishthump, I did as you suggested, CV54 to 0 and F1. I did it three times, but B131 is still pulling B125. I have the two locos run in, 30mins each direction. I will keep running them as stand alone and maybe they may loosen up a bit more. When I run them as MU there is a grinding noise from B131. I will do as you suggested a few more times and see will that help. Thanks again. Controller.
  24. controller
    Thank you gentlemen. I now have all sound up and running. I knew I could depend on the experts. If you could indulge me , I have one more small problem. One loco run faster than the other, and is inclined to drag the slower one. There is not much of a difference, but over time I am concerned it may damage the motor. Thanks again. Controller.
  25. controller
    Irishthump, Thank you, I entered value 201 to CV21 like you suggested and I now have sound of the engines starting up. I now need to get the horns working . If you can help me with that, I would be very grateful. Thanks again. I am working with the Gaugemaster Prodigy Advance. The head and marker lights are working as they should. Controller
×
×
  • Create New...

Important Information

Terms of Use

  I accept