Joe Keegan

Hi David , likewise too This was the best photo I took

Went to the Uckfield show yesterday from Dublin to see the Iain Rice layouts with a bonus to see Northport Quay and meet David with a fellow SDMRC member Clever solution for a refreshment while operating a layout in the second photo

Photo taken at Inchicore works ?

This speaker is too long for a Baby GM as you will have to shorten the PCB and if you are not confident in modifying/shortening the PCB then do not modify/shorten the PCB. The ideal speaker is the Baby Boomer which requires a small amount of filing the chassis/inside the hood and soldering the purple cables to the PCB marked SPK +/- . Polarity is not important in the Baby GM . The Murphy Models 121 sound decoder is ideal for the Baby GM.

Picture of the layout would help

The station reminds me of just outside Newcastle West heading for Castleisland. In the old days, just as you got over the long drive to the top of the hill driving towards Castleisland the station was in the cutting to your right hand side.

The late Alec Phillips former member of the MRSI passed away in the 1980’s. Back then Alec would you showed/explain to you on how to do the conversion but unfortunately it was never documented. Alec’s pride & joy was his scratch built GNRi 4-4-0 accompanied him on his heavenly journey.

Barrow Street looks the part in its new home When is the Barrow Street open day ? Askin for a friend

Murphy Models 121 EMD567 sound decoder

Tasty Will you be fitting a flywheel ? cheers Joe

.

.

Saint Patrick ?

Care to tell the forum where you got that information from “ the tooling is gone and needs redoing from scratch ” ?

A picture of both sides would paint a thousand words